How to judge the wear of Flatbed semi trailer tires

The tires of Flatbed semi trailers are key components to ensure the safe driving of vehicles. Correctly judging the wear of tires and replacing them in time is a must for every car owner and driver. This article will introduce you to how to judge the wear of Flatbed semi trailer tires to ensure driving safety.

1. Observe the wear marks

There will be wear marks at the bottom of the tire tread groove. When the tread wear approaches these marks, the drainage capacity of the tire is greatly reduced, and slippery roads can easily cause the vehicle to lose control. At this time, the tire should be replaced immediately.

2. Check the tire surface

The tire surface may have cracks, bulges, rubber loss, severe sidewall wear and foreign matter retention. These damages will seriously affect tire performance and increase the risk of tire blowout. Regularly visually and tactilely inspect the tire surface, and deal with abnormalities in time.

3. Identify tire aging

Tire aging is manifested as surface hardening and cracking. Aging tires lose elasticity, the tread is easily deformed, and there is a risk of tire blowout. Check the production date of the tire. If it exceeds 5-6 years, it should be replaced even if the surface is intact.

4. Check tire pressure

Tire pressure that is too high or too low will accelerate wear and cause a blowout. Use a tire pressure gauge to check tire pressure in a cold state to ensure that it is within the recommended range.

5. Develop good habits

Avoid sudden braking, sharp turns, overloading, high-speed driving, and running over sharp objects. Change tire positions regularly to ensure even wear and extend tire life.

Through the above methods, you can effectively judge the wear of Flatbed semi trailer tires and take timely measures to ensure driving safety. I hope this article will be helpful to you.