What should I do if the Flatbed semi trailer is flooded? Don't panic!

In May, the northern hemisphere enters summer, and the rainy season also comes. When the Flatbed semi trailer is driving, it is inevitable to encounter rainy weather or wading sections. When the water level is too deep, the vehicle will be directly turned off during driving in serious cases. What should I do when encountering this situation? How should the vehicle be maintained after smoothly passing the wading section? Don't panic, this article will tell you the solution!

When we find that the Flatbed semi trailer is shut down due to water ingress during driving, the ignition switch should be turned off immediately, and the Flatbed semi trailer should not be tried to be started again. It should be moved to a stable place and the vehicle should be kept at a slope as much as possible so that water can flow in the exhaust pipe.

If water enters the inside of the mover of the Flatbed semi trailer, it means that the spark plug should be removed. At the same time, the fuel supply system and ignition system of the vehicle should be manually cut off in time, and the mover of the Flatbed semi trailer should use the motor to remove the internal water.

In addition, the oil condition of each system of the vehicle should be checked, and the bubbles and turbid oil should be replaced in time.

When the vehicle is cleaned and ready to go on the road, don't rush, you should conduct a road test on the vehicle. Make sure that the Flatbed semi trailer has no abnormal noise during driving before going on the road. If there is obvious driving noise, the bearings and rotating parts of the mover should be checked. When wading, if water enters the Flatbed semi trailer, the main task of maintenance is to remove the water accumulated in the car. There are several sealing plugs under the vehicle chassis. Opening the plugs can release the water accumulated in the car.