Causes and prevention of Flatbed semi trailer tire eating

Some drivers sometimes cause tire eating accidents due to improper driving during driving, which is particularly common in Flatbed semi trailer transportation. But if the quality of the vehicle is questioned because of this, as a professional Flatbed semi trailer manufacturer, we feel wronged. In fact, this problem can be largely avoided as long as it is used and maintained correctly in daily life.

1. Check whether the U-bolt of the vehicle is fastened in place, pay attention to the maintenance of the tie rod, especially when the new car is pulling goods or running 1,000 kilometers, check the U-bolt and tie rod.

2. Whether the tire is inflated according to the air pressure standard is also one of the important reasons for abnormal tire wear. If the air pressure is too low, the tire bends inward, a "bridge effect" occurs, and the edge of the tire is severely damaged. If it is too high, the wear of the middle part of the tire will be aggravated.

3. Regarding tire maintenance, the tire should be replaced regularly on a daily basis, which can make the tire wear relatively even and effectively extend the life of the tire.

4. The leaf spring device is misaligned. The vibration and impact of the Flatbed semi trailer during the driving process will also cause abnormal wear of the tires.

5. The braking system, such as the blocked brake air circuit, the brake belt, and the ABS are not properly debugged, will also affect the degree of wear of the tires.

6. Don't think that serious overloading will not "eat the tires". The harm of overloading to the tires is self-evident. For your life safety, to ensure the life of the tires, and the smooth operation of the vehicle, do not overload.

7. The driver's bad driving habits are also one of the main reasons for abnormal wear of tires. For example, frequent emergency braking and sharp turns will cause abnormal wear of Flatbed semi trailer tires.